Revision as of 09:43, 14 April 2014

This site contains information on the following projects:

• General Information
  • IPv6 - Internet Protocol Version 6
  • Imaging Windows based Computers using DISM
  • Setup NFS Server for RootNFS
  • Setup TFTP Server for booting Kernel Images
  • OV7670 Camera Module with AL422 FIFO - Theory of Operation

• 802.15.4 WPAN Radios
  • Microchip MRF24J40 Explorer 2.4GHz Wireless UART Development Kit (GP-GC500)
  • Budget 802.15.4 6LoWPAN Protocol Analyser using Wireshark for the Internet of Things (IoT)

• 433MHz Radios
  • Reverse engineering the RF protocol on a Kambrook Power Point Controller
• GuruPlug Server Plus
  • Upgrading U-Boot with Device Tree Support for the GuruPlug Server Plus
  • Building the Linux Kernel with Device Tree Support for the GuruPlug Server Plus
  • Building an Emdebian (Embedded Debian) root filesystem for GuruPlug/armel
  • Creating an UBIFS Root Filesystem
  • U-Boot USB Commands
  • Updating the Kernel on the GuruPlug

• Hacking the Seagate FreeAgent GoFlex Home
  • Upgrading U-Boot with Device Tree Support for the Seagate GoFlex Home
  • Teardown / Internal Photos
  • Console Port
  • Firmware Recovery Mechanism
  • Building the Linux Kernel with Device Tree Support for the GoFlex Home
  • Creating UBIFS Root FileSystem for the Seagate GoFlex Home
  • MTD Tests on the Toshiba TC58NVG1S3ETA00 256Mbyte NAND

• BeagleBone Black
  • Building the BeagleBone Black Kernel
  • BeagleBone Black Default uBoot Environment Variables
  • Understanding the BeagleBone Black Boot Process
  • BeagleBone Black Cape Manager
  • Beaglebone and the 3.8 Kernel - Device Tree (DT)
  • Using the Microchip IEEE 802.15.4 Radio on the BeagleBone Black

• ARM Userland Applications
  • Cross Compiling MTD Utilities for ARM
  • Cross Compiling Samba SMB/CIFS Server for ARM
  • Cross Compiling USB/IP for ARM
  • Cross Compiling Wide DHCPv6 for ARM
  • Cross Compiling Radvd for ARM
  • Cross Compiling Linux Zigbee for ARM
  • Cross Compiling RP-PPPoE for ARM