Revision as of 12:12, 5 June 2014 by Craig Peacock (Talk | contribs)

Enabling GuruPlug Server Marvell Libertas 8688 SDIO 802.11b/g WiFi

Enable the following Kernel modules and recompile:

Device Drivers > Network device support > Wireless LAN
   Marvell 8xxx Libertas WLAN driver support
   Marvell Libertas 8385/8686/8688 SDIO 802.11b/g cards

Download Binary BLOBs to /lib/firmware:

mkdir /lib/firmware
cd /lib/firmware
wget wget http://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/plain/mrvl/sd8688_helper.bin
wget http://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/plain/mrvl/sd8688.bin

And reboot. Upon boot, the kernel should try to load the firmware before the rootfs is available and fail.

mmc0: new high speed SDIO card at address 0001
libertas_sdio mmc0:0001:1: Direct firmware load failed with error -2
libertas_sdio mmc0:0001:1: Falling back to user helper

It should then retry after rootfs is available and report something similar to:

libertas_sdio mmc0:0001:1 (unregistered net_device): 00:24:23:1f:b3:e9, fw 10.38.1p25, cap 0x00000303
libertas_sdio mmc0:0001:1 wlan0: Marvell WLAN 802.11 adapter