(Added prebuilt download)
 
(6 intermediate revisions by one user not shown)
Line 5: Line 5:
  
 
<PRE>
 
<PRE>
wget http://www.samba.org/samba/ftp/stable/samba-3.6.3.tar.gz
+
wget http://samba.org/samba/ftp/stable/samba-3.6.23.tar.gz
tar -xzf samba-3.6.3.tar.gz
+
tar -xzf samba-3.6.23.tar.gz
 
</PRE>
 
</PRE>
  
Line 12: Line 12:
  
 
<PRE>
 
<PRE>
cd samba-3.6.3/source3
+
cd samba-3.6.23/source3
 
./autogen.sh
 
./autogen.sh
 
./configure --without-krb5 --without-ldap --without-ads \
 
./configure --without-krb5 --without-ldap --without-ads \
 
   --disable-cups --enable-swat=no --with-winbind=no \
 
   --disable-cups --enable-swat=no --with-winbind=no \
   --target=arm-none-linux-gnueabi --host=arm-none-linux-gnueabi \
+
   --target=arm-linux-gnueabi --host=arm-linux-gnueabi \
   --prefix=/usr/local/samba --with-configdir=/etc \
+
   --prefix= --with-configdir=/etc \
 
   samba_cv_CC_NEGATIVE_ENUM_VALUES=yes \     
 
   samba_cv_CC_NEGATIVE_ENUM_VALUES=yes \     
 
   libreplace_cv_HAVE_GETADDRINFO=no \
 
   libreplace_cv_HAVE_GETADDRINFO=no \
 
   ac_cv_file__proc_sys_kernel_core_pattern=yes
 
   ac_cv_file__proc_sys_kernel_core_pattern=yes
 
make
 
make
make install DESTDIR=/home/cpeacock/export/rootfs-f12
+
make install DESTDIR=/home/export/rootfs
 
</PRE>
 
</PRE>
  
Line 48: Line 48:
 
</PRE>
 
</PRE>
  
== Download Pre-built Binaries ==
+
== Creating users ==
 +
 
 +
You can add new Samba users using
 +
 
 +
<PRE>
 +
smbpassword -a <username>
 +
</PRE>
 +
 
 +
To be successful, there must be an entry in /etc/passwd corresponding to the user.
 +
 
 +
== Notes on minimal systems ==
 +
 
 +
If smbd or nmbd reports <TT>smbd: error while loading shared libraries: libgcc_s.so.1: cannot open shared object file: No such file or directory</TT>, then you are missing the GCC low-level runtime library. You can copy it from your arm-linux-gnueabi cross compiler:
 +
 
 +
<PRE>
 +
cp /usr/arm-linux-gnueabi/lib/libgcc_s.so.1 /home/export/rootfs/lib
 +
</PRE>
 +
 
 +
If smbd fails to start, check the logs in /var/log.smbd. If smbd fails to daemonise and there is no error message, potentially you have a user account problem. If you don't have a /etc/passwd file, create one with a root and nobody user:
 +
 
 +
<PRE>
 +
root::0:0:root:/root:/bin/bash
 +
nobody:x:65534:65534:nobody:/nonexistent:/bin/bash
 +
</PRE>
 +
 +
== Download pre-built binaries ==
  
 
The link below contains a bzip2 tarball of Samba compiled for ARM:
 
The link below contains a bzip2 tarball of Samba compiled for ARM:
Line 55: Line 80:
 
* Built using :
 
* Built using :
 
** arm-none-linux-gnueabi-gcc version 4.6.1 (Sourcery CodeBench Lite 2011.09-70)
 
** arm-none-linux-gnueabi-gcc version 4.6.1 (Sourcery CodeBench Lite 2011.09-70)
 +
 +
 +
* [http://wiki.beyondlogic.org/prebuilt/samba-3.6.23-arm-linux-gnueabi.tar.bz2 samba-3.6.23-arm-linux-gnueabi.tar.bz2] [md5hash 52c8c8883fa1387623491c3ba1ca661f]
 +
* Built using :
 +
** arm-linux-gnueabi-gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1)

Latest revision as of 13:58, 17 April 2014

Cross Compiling Samba

Download the source and uncompress:

wget http://samba.org/samba/ftp/stable/samba-3.6.23.tar.gz
tar -xzf samba-3.6.23.tar.gz

And cross compile for ARM:

cd samba-3.6.23/source3
./autogen.sh
./configure --without-krb5 --without-ldap --without-ads \
  --disable-cups --enable-swat=no --with-winbind=no \
  --target=arm-linux-gnueabi --host=arm-linux-gnueabi \
  --prefix= --with-configdir=/etc \
  samba_cv_CC_NEGATIVE_ENUM_VALUES=yes \    
  libreplace_cv_HAVE_GETADDRINFO=no \
  ac_cv_file__proc_sys_kernel_core_pattern=yes
make
make install DESTDIR=/home/export/rootfs

Creating smb.conf

Create a Samba configuration file (smb.conf) and place it in /etc. Below is a minimal example configuration, sharing the home directories located in /home.

[global]
workgroup = WORKGROUP
netbios name = SAMBA_FS
[Home]
path = /home
writable = yes
comment = Home Directories

Starting Samba

Samba can be started using the following. smbd is the main Samba3 daemon and handles the SMB protocol. nmbd provides NetBIOS name server support.

/sbin/smbd -D
/sbin/nmbd -D

Creating users

You can add new Samba users using

smbpassword -a <username>

To be successful, there must be an entry in /etc/passwd corresponding to the user.

Notes on minimal systems

If smbd or nmbd reports smbd: error while loading shared libraries: libgcc_s.so.1: cannot open shared object file: No such file or directory, then you are missing the GCC low-level runtime library. You can copy it from your arm-linux-gnueabi cross compiler:

cp /usr/arm-linux-gnueabi/lib/libgcc_s.so.1 /home/export/rootfs/lib

If smbd fails to start, check the logs in /var/log.smbd. If smbd fails to daemonise and there is no error message, potentially you have a user account problem. If you don't have a /etc/passwd file, create one with a root and nobody user:

root::0:0:root:/root:/bin/bash 
nobody:x:65534:65534:nobody:/nonexistent:/bin/bash

Download pre-built binaries

The link below contains a bzip2 tarball of Samba compiled for ARM: