(Reverted back to version 3.2.22)
(Cross Compiling Linux-Zigbee (IEEE 802.15.4) User Space Tools)
Line 10: Line 10:
 
sudo apt-get install autoconf
 
sudo apt-get install autoconf
 
sudo apt-get install libtool
 
sudo apt-get install libtool
 +
sudo apt-get install help2man
 
</PRE>
 
</PRE>
  

Revision as of 12:53, 25 June 2014

Cross Compiling Linux-Zigbee (IEEE 802.15.4) User Space Tools

The following contains instructions for cross-compiling the ARM Linux-Zigbee User Space Tools on Ubuntu 13.10. It requires the gcc cross-compiler, bison, flex, autoconf and libtool to be installed. If these prerequisites have not been installed, please install them:

sudo apt-get install gcc-arm-linux-gnueabi
sudo apt-get install bison
sudo apt-get install flex
sudo apt-get install autoconf
sudo apt-get install libtool
sudo apt-get install help2man

Netlink Protocol Library Suite (libnl)

Download, cross compile and install the Netlink Protocol libraries.

wget http://www.carisma.slowglass.com/~tgr/libnl/files/libnl-3.2.22.tar.gz
tar -xzf libnl-3.2.22.tar.gz
cd libnl-3.2.22
./configure --prefix=/home/cpeacock/export/rootfs --host=arm-linux-gnueabi
make 
make install

Linux-Zigbee User Space Tools

With the dependencies above cross compiled for ARM and installed, download the lowpan-tools and cross compile.

git clone git://git.code.sf.net/p/linux-zigbee/linux-zigbee linux-zigbee
cd linux-zigbee
./autogen.sh
./configure --prefix=/home/cpeacock/export/rootfs --host=arm-linux-gnueabi PKG_CONFIG_PATH=/home/cpeacock/export/rootfs/lib/pkgconfig
make 
make install