(Added list of prerequisites)
(Changed prefix to rootfs)
Line 20: Line 20:
 
tar -xzf libnl-3.2.23.tar.gz
 
tar -xzf libnl-3.2.23.tar.gz
 
cd libnl-3.2.23
 
cd libnl-3.2.23
./configure --prefix=/home/cpeacock/beagle --host=arm-linux-gnueabi
+
./configure --prefix=/home/cpeacock/export/rootfs --host=arm-linux-gnueabi
 
make  
 
make  
 
make install
 
make install

Revision as of 01:09, 16 November 2013

Cross Compiling Linux-Zigbee (IEEE 802.15.4) User Space Tools

The following contains instructions for cross-compiling the ARM Linux-Zigbee User Space Tools on Ubuntu 13.10. It requires the gcc cross-compiler, bison, flex, autoconf and libtool to be installed. If these prerequisites have not been installed, please install them:

sudo apt-get install gcc-arm-linux-gnueabi
sudo apt-get install bison
sudo apt-get install flex
sudo apt-get install autoconf
sudo apt-get install libtool

Netlink Protocol Library Suite (libnl)

Download, cross compile and install the Netlink Protocol libraries.

wget http://www.carisma.slowglass.com/~tgr/libnl/files/libnl-3.2.23.tar.gz
tar -xzf libnl-3.2.23.tar.gz
cd libnl-3.2.23
./configure --prefix=/home/cpeacock/export/rootfs --host=arm-linux-gnueabi
make 
make install

Linux-Zigbee User Space Tools

With the dependencies above cross compiled for ARM and installed, download the lowpan-tools and cross compile.

git clone git://git.code.sf.net/p/linux-zigbee/linux-zigbee linux-zigbee
cd linux-zigbee
./autogen.sh
./configure --prefix=/ --host=arm-linux-gnueabi PKG_CONFIG_PATH=/home/cpeacock/beagle/lib/pkgconfig
make 
make install DESTDIR=/home/cpeacock/beagle