Revision as of 09:34, 4 May 2014 by Craig Peacock (Talk | contribs)

Prerequisites

ncurses

Download, build and install the ncurses library:

wget http://ftp.gnu.org/pub/gnu/ncurses/ncurses-5.9.tar.gz
tar -xzf ncurses-5.9.tar.gz
cd ncurses-5.9
./configure --host=arm-linux-gnueabi --prefix=/usr/arm-linux-gnueabi CXX="arm-linux-gnueabi-g++"
make
make install

SQLite

SQLite is a software library that implements a self contained server-less transactional SQL database engine.

wget https://sqlite.org/2014/sqlite-autoconf-3080403.tar.gz
tar -xzf sqlite-autoconf-3080403.tar.gz
cd sqlite-autoconf-3080403
./configure --host=arm-linux-gnueabi --prefix=/usr/arm-linux-gnueabi 
make
make install 

OpenSSL

Certain Asterisk modules such as chan_sip and chan_iax2 require the res_crypto resource module. The res_crypto module will only be built if the libssl dependency is installed.

There seems to be an issue with OpenSSL and Perl 5.18.1 that results with the following error:

cms.pod around line 474: Expected text after =item, not a number
POD document had syntax errors at /usr/local/bin/pod2man line 71.

Linux from Scratch have patches that resolve this issue and we apply them here.

wget http://www.openssl.org/source/openssl-1.0.1g.tar.gz
wget http://www.linuxfromscratch.org/patches/blfs/svn/openssl-1.0.1g-fix_parallel_build-1.patch
wget http://www.linuxfromscratch.org/patches/blfs/svn/openssl-1.0.1g-fix_pod_syntax-1.patch
tar -xzf openssl-1.0.1g.tar.gz
cd openssl-1.0.1g
patch -Np1 -i ../openssl-1.0.1g-fix_parallel_build-1.patch
patch -Np1 -i ../openssl-1.0.1g-fix_pod_syntax-1.patch
./Configure linux-generic32 shared --prefix=/usr/arm-linux-gnueabi
make CC=arm-linux-gnueabi-gcc RANLIB=arm-linux-gnueabi-ranlib LD=arm-linux-gnueabi-ld MAKEDEPPROG=arm-linux-gnueabi-gcc
make install

BlueZ Bluetooth Libraries (Optional)

If you want to use chan_mobile to connect asterisk to your mobile phone via Bluetooth, then you will require the Bluetooth libraries and header files installed.

See Cross Compiling BlueZ Bluetooth tools for ARM

Asterisk

With all our prerequisites built, you can now download, build and install Asterisk:

wget http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-11.9.0.tar.gz
tar -xzf asterisk-11.9.0.tar.gz
cd asterisk-11.9.0
./configure --host=arm-linux-gnueabi --target=arm-linux-gnueabi --build=i686-pc-linux-gnu --disable-xmldoc
make menuselect
make
sudo make install DESTDIR=/home/export/rootfs
sudo make samples DESTDIR=/home/export/rootfs

Asterisk will require shared libraries to load. Copy over libsqlite3.so, libssl.so, libcrypto.so and libgcc_s.so to your root filesystem:

cp /usr/arm-linux-gnueabi/lib/libsqlite3.so.0.8.6 /home/export/rootfs/lib
cp /usr/arm-linux-gnueabi/lib/libssl.so.1.0.0 /home/export/rootfs/lib
cp /usr/arm-linux-gnueabi/lib/libcrypto.so.1.0.0 /home/export/rootfs/lib
cp /usr/lib/gcc-cross/arm-linux-gnueabi/4.7.3/libgcc_s.so.1 /home/export/rootfs/lib

In addition to the above new libraries, Asterisk also places libasteriskssl.so in /usr/lib. If ldconfig is not executed to re-configure dynamic linker run-time bindings, Asterisk is likely to generate an error: error while loading shared libraries: libasteriskssl.so.1: cannot open shared object file: No such file or directory.

To generate new dynamic linker run-time bindings, on the actual host, execute:

ldconfig -v

Outside of modifying Asterisk configuration files, Asterisk should now we ready to run. To start with a console CLI:

asterisk -c