(Created page with "Toner consists of polymer mixed with a very dry and in addition fine powder which typically is carbon-based and in addition afterward applied to be able to the paper. Its cons...")
 
(Created page with " === Budget 802.15.4 6LoWPAN Protocol Analyser using Wireshark === When I first started developing with the [http://www.microchip.com/wwwproducts/Devices.aspx?dDocName=en0277...")
Line 1: Line 1:
Toner consists of polymer mixed with a very dry and in addition fine powder which typically is carbon-based and in addition afterward applied to be able to the paper. Its consistency typically is comparable to dust. The particular laser functions with all the toner in order to basically burn it directly on to be able to the paper. The actual toner particles melt within the heat emitted from the fuser and afterward stick in order to the paper to be able to create the particular text and even images. It actually sticks to the paper making use of the properties of static electricity.  
+
 
Just about all toner cartridge compositions usually are certainly not equal. Each manufacturer makes its own mix that directly impacts the actual resolution that is printed. A better, clearer resolution could be created by using smaller toner particles. It's as well greater for the particles that would be identical in shape and in addition size that would receive the best look on paper. Whenever it gets clear, the particular manufacturer usually refills it. Toner is actually often selected over traditional ink given that the actual cartridges are surprisingly large and even hold plenty of toner. The particular expected lifespan of certain are generally as several as 5,000 pages. When heavy output typically is expected, toner is actually preferable over ink.
+
=== Budget 802.15.4 6LoWPAN Protocol Analyser using Wireshark ===
Ink Cartridges
+
 
Yet another option for printing typically is ink. Printing with a ink cartridge typically is really similar in order to the particular task of writing on a piece of paper with a pen. The cartridge typically is filled with ink and also the actual printer, making use of pressure, applies the actual ink directly to the paper. The actual ink typically is dispersed via the particular holes on the cartridge itself. Inks is either oil and / or water based.  
+
When I first started developing with the [http://www.microchip.com/wwwproducts/Devices.aspx?dDocName=en027752| Microchip MRF24J40 802.15.4 Radio], I purchased Microchip's [http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1406&dDocName=en554244| Zena Wireless Adapter] and downloaded a copy of the Wireless Development Studio. It has been adequate for diagnosing issues at the raw [http://standards.ieee.org/getieee802/download/802.15.4-2011.pdf|802.15.4 MAC] layer, but less useful when it has come to protocols such as 6LoWPAN with IPv6 header compression.
Inkjets tend to be ideal if perhaps expense typically is a matter. It is cheaper in order to buy ink rather of toner. The actual quality of the actual ink remains excellent because it usually runs out before it goes bad from aging. They're equally simpler for the actual average user in order to change not to mention small enough that would hold within 1 hand. On average, a page printed with ink costs from 5 in order to 10 cents.  
+
 
When choosing to make a next printer buy select carefully between a laser printer, which uses toner, and even the actual inkjet printer, which uses ink. Every has its advantages not to mention drawbacks which have to be evaluated individually.
+
[http://www.wireshark.org| Wireshark] is the de facto standard for analysing IP based networks and has support to [http://wiki.wireshark.org/IEEE_802.15.4| decode 802.15.4] packets. The problem is finding suitable hardware to capture the 802.15.4 packets and pass them to Wirehark for decoding and display. Much of the existing hardware encapsulates the packets and sends them to Wireshark over an ethernet or TCP/IP connection.
Selecting the correct ink as well as toner for your printer typically is going to include a greater impact on its lifespan and even potency than you probably realise. Too typically major issues occur when a brand-name printer employs third-party versions of its necessary toner cartridge. This is real for each brand such as searching for the correct HP toner for the particular device. Generally there is actually a remarkable temptation in order to go with off-brands which usually are quite inexpensive certainly not realising that, throughout the long run, many of these toner cartridges may do more harm or simply incorporate more ink than a brand-name product can.
+
 
A superior question asked is whether or not it is actually a suitable idea that would refill a toner cartridge. Frequently, poor construction of an off-brand replacement cartridge for an HP printer may harm the device besides the fact that the particular ink typically is of good quality. The same could be claimed for refilling your own HP brand toner cartridge with substandard or perhaps poor quality refills. Many of these might never provide your needs the particular required results your needs tend to be searching for within your own printing solutions. This does not necessarily mean you will need to avoid the particular refill procedure. But, you will need in order to be extremely cautious with regards to receiving the actual highest top quality service for refilling your individual HP toner cartridge.
+
The guys over at [http://www.freaklabs.org/ Freaklabs] have a [http://www.freaklabs.org/index.php/WSBridge.html| WSBridge] open source application that acts as a bridge between Chibi/chibiArduino and Wireshark. It receives raw packets on a serial port and creates a Pipe to feed the captured packets into Wireshark.
Improved Top quality Makes Exchange Quite possible
+
Right now there are generally countless services that you can buy today which can exchange a HP toner cartridge for a good quality generic, and / or third-party, product. This really is analogous to making a propane gas tank refill exchange. As long as the particular physical product does certainly not impede and / or impair your own printer operation, the particular exchange task will be the particular more reasonable not to mention affordable method to locate replacement ink.
+
The ideal place in order to purchase toner, please visit [http://www.toner.at/toner.html tonershop]
+

Revision as of 04:51, 10 January 2014

Budget 802.15.4 6LoWPAN Protocol Analyser using Wireshark

When I first started developing with the Microchip MRF24J40 802.15.4 Radio, I purchased Microchip's Zena Wireless Adapter and downloaded a copy of the Wireless Development Studio. It has been adequate for diagnosing issues at the raw MAC layer, but less useful when it has come to protocols such as 6LoWPAN with IPv6 header compression.

Wireshark is the de facto standard for analysing IP based networks and has support to decode 802.15.4 packets. The problem is finding suitable hardware to capture the 802.15.4 packets and pass them to Wirehark for decoding and display. Much of the existing hardware encapsulates the packets and sends them to Wireshark over an ethernet or TCP/IP connection.

The guys over at Freaklabs have a WSBridge open source application that acts as a bridge between Chibi/chibiArduino and Wireshark. It receives raw packets on a serial port and creates a Pipe to feed the captured packets into Wireshark.