(Created page with "Thousands of folks buy cell phones that offer exciting features. Many of the folks make use of mobile phones within purchase that would make calls, capture pictures, send mess...")
 
 
(10 intermediate revisions by one user not shown)
Line 1: Line 1:
Thousands of folks buy cell phones that offer exciting features. Many of the folks make use of mobile phones within purchase that would make calls, capture pictures, send messages, play games and even browse on the net. Mobile phones are fully entertaining gadgets. Whereas Latest Free Mobile Themes Download usually are additionally plays a vital role and in addition these themes are really the applications which are really installed in order to change background picture on phone screen.  
+
 
Mobile phone themes tend to be the particular specialized feature that includes a collection of icons and also pictures with awesome graphics. Themes tend to be selected in order to decorate and even personalize mobile phone. Moreover, specific can furthermore change the particular font's size and even its colours to be able to create the particular texts more appealing. Themes can certainly be based on several categories such as festive season, movies, hot etc. Almost all many of these bring a transition to the feel of the actual device. For example, if somebody applies Diwali Latest Free Mobile Themes Download, sounds of crackers, visuals of fireworks, combination of different colors may be witnessed.  
+
By default, the ROM in the Sitara AM3359 will boot from the MMC1 interface first (the onboard eMMC), followed by MMC0 (MicroSD), UART0 and USB0.
This really is a additional and most appealing feature of today's phones. Inside the same way, by applying movie based themes, you can easily see such effects that reflects the particular feel of that particular film. Whenever, a movie does really well throughout the cinema plus attain favored, persons like to follow the actual rend showed in which. Which is actually the reason why, they are really thus much desirable among the particular youngsters as they follow the particular films inside a tremendous means.  
+
 
Looking at the rising demand of this particular application, countless service providers include entered this particular section with lots of raw attraction. Indeed, many of the particular leading mobile manufacturers such as Nokia, Samsung, Sony Erriccson provide in-built themes and so that buyers will apply them that would stylize their devices. There are really plenty of sites which deal with this attribute.  
+
If the boot switch (S2) is held down during power-up, the ROM will boot from the SPI0 Interface first, followed by MMC0, USB0 and UART0. This allows the BeagleBone Black to bypass the onboard eMMC and boot from the removable uSD (provided no valid boot device is found on SPI0.) This can be used to recover from a corrupted onboard eMMC.  
Thus, anybody can certainly download Latest Free Mobile Themes Download into the actual mobiles. Actually, many of the themes come for free. With Internet enable phones, it has become more simple and also hassle free of charge found on the parts of the users in order to access these excellent attributes. One will moreover rejuvenate the actual mood with this particular eye catching qualities which may certainly blow your mind. They can easily furthermore aid reflecting the particular personality of the particular user, as a person select a feature that goes with his personality.  
+
 
With the help of funny, romantic themes, 1 can easily moreover impress the particular individuals about. Not just this particular, by the actual utilize of distinguished fonts as well as colors, specific could quite easily personalize his device. Because changing time has produced the particular mobile phones a important as well as unavoidable part of our lives, everybody love to give a distinctive identity to the phones. And so, no more wait that would glamorize your favorite gadget the particular technique us are looking for it to be.
+
The Sitara AM3359 will try to load and execute the first stage bootloader called "MLO" from a Fat 12/16 or 32 bit MBR based filesystem. If using eMMC, this file is loaded using RAW mode. This means the ROM looks for a TOC at four specific offsets.
Being a part of one's style statement, mobile phones are generally featured with lots of modern and even trendy application thus that it will likely create an impact on others. Which typically is the reason why, mobile users are generally a lot interested with regard to stylizing their device throughout their own unique way. That is actually the reason behind rapid growing popularity of free Latest Free Mobile Themes Download. This application enables users to be able to grant an unique look to the handset. This really is an unique feature that consists of a collection of icons, as well as pictures with awesome graphics. Themes happen to be selected that would decorate as well as personalize mobile phone. Pretty much themes cover numerous things which aid giving the actual cell phones a complete fresh feel.  
+
 
With Latest Free Mobile Themes Download, users could enjoy full freedom in order to change the actual settings with the aid of many options including colour tones for highlighted, colourful not to mention perfect background images for high end applications. This particular package of theme mostly include good quality graphics that the users can change as well as reset based on their preference. It not just gives a distinguished identity to be able to our phones nevertheless in addition assists inside altering a bunch of prominent features of the actual handsets.  
+
MLO Booting (uBoot SPL Second Program Loader):
Users usually are able that would enjoy superb benefit of converting their favourite images, photos, cartoon clips, illustrations plus logos into attractive Latest Free Mobile Themes Download. This task is actually certainly not at almost all tough, as you simply just have to select the images of his or her choice as well as afterward accordingly go that would the actual settings that would change the application. Simply just by changing the particular application, we all could certainly enjoy thousands of stylish attributes throughout our devices. Inside purchase to stylize the actual mobiles we all try making use of themes from various categories. With the efficient employ of graphics, vicious colours as well as high-end sound top quality these themes tend to be obtaining tremendous popularity and also response from the users.  
+
<PRE>
This are generally special applications tend to be being developed merely for that particular mobile. Many of these are really the actual proof of the particular creativity and also at same time it reflects the particular choice as well as taste of the particular users. They generally comes with each and every model because an inbuilt feature. Furthermore specific enjoys the actual choice of downloading this particular awesome application from the Internet. Right now there are generally number of websites that help us receiving the particular right attribute of the taste. So, you can easily download Latest Free Mobile Themes Download of your individual selection. This way, your needs can easily injects an everyday living that would the lifeless handset. Which tends to change according to be able to the demand of the actual consumers and updates of the actual market.  
+
U-Boot SPL 2013.04-dirty (Jun 19 2013 - 09:57:14)
For latest free mobile themes download, Latest Free Mobile Videos Download, Latest Free Mobile Wallpapers Download please check out [http://www.mobilerule.org/Free/Mobile-Themes/ Latest Free Download Mobile Themes]
+
musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
 +
musb-hdrc: MHDRC RTL version 2.0
 +
musb-hdrc: setup fifo_mode 4
 +
musb-hdrc: 28/31 max ep, 16384/16384 memory
 +
USB Peripheral mode controller at 47401000 using PIO, IRQ 0
 +
musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
 +
musb-hdrc: MHDRC RTL version 2.0
 +
musb-hdrc: setup fifo_mode 4
 +
musb-hdrc: 28/31 max ep, 16384/16384 memory
 +
USB Host mode controller at 47401800 using PIO, IRQ 0
 +
OMAP SD/MMC: 0
 +
mmc_send_cmd : timeout: No status update
 +
reading u-boot.img
 +
reading u-boot.img
 +
</PRE>
 +
 
 +
MLO is a first stage uBoot Bootloader designed to load a second stage uBoot bootloader with enhanced features. This second stage bootloader is also found on the FAT partition with the filename of "u-boot.img"
 +
 
 +
<PRE>
 +
U-Boot 2013.04-dirty (Jun 19 2013 - 09:57:14)
 +
 
 +
I2C:  ready
 +
DRAM:  512 MiB
 +
WARNING: Caches not enabled
 +
NAND:  No NAND device found!!!
 +
0 MiB
 +
MMC:  OMAP SD/MMC: 0, OMAP SD/MMC: 1
 +
*** Warning - readenv() failed, using default environment
 +
 
 +
musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
 +
musb-hdrc: MHDRC RTL version 2.0
 +
musb-hdrc: setup fifo_mode 4
 +
musb-hdrc: 28/31 max ep, 16384/16384 memory
 +
USB Peripheral mode controller at 47401000 using PIO, IRQ 0
 +
musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
 +
musb-hdrc: MHDRC RTL version 2.0
 +
musb-hdrc: setup fifo_mode 4
 +
musb-hdrc: 28/31 max ep, 16384/16384 memory
 +
USB Host mode controller at 47401800 using PIO, IRQ 0
 +
Net:  <ethaddr> not set. Validating first E-fuse MAC
 +
cpsw, usb_ether
 +
Hit any key to stop autoboot:  1  0
 +
gpio: pin 53 (gpio 53) value is 1
 +
Card did not respond to voltage select!
 +
mmc0(part 0) is current device
 +
mmc_send_cmd : timeout: No status update
 +
Card did not respond to voltage select!
 +
No micro SD card found, setting mmcdev to 1
 +
mmc1(part 0) is current device
 +
gpio: pin 54 (gpio 54) value is 1
 +
SD/MMC found on device 1
 +
</PRE>
 +
 
 +
uBoot will load using a [[BeagleBoneBlack_Default_uBoot_Environment_Variables|default environment space]]. This default space includes a variable bootenv=uEnv.txt and associated script that allows additional variables to be added or overwritten by adding them to an uEnv.txt file placed on the FAT partition. uBoot will attempt to load this file and append the extra variables:
 +
 
 +
<PRE>
 +
reading uEnv.txt
 +
26 bytes read in 2 ms (12.7 KiB/s)
 +
Loaded environment from uEnv.txt
 +
Importing environment from mmc ...
 +
</PRE>
 +
 
 +
uBoot will then load the Linux Kernel and compiled Device Tree Binary blob from eMMC:
 +
 
 +
<PRE>
 +
load mmc 1:2 0x80F80000 /boot/am335x-boneblack.dtb
 +
load mmc 1:2 0x80007fc0 /boot/uImage
 +
</PRE>
 +
 
 +
<PRE>
 +
gpio: pin 55 (gpio 55) value is 1
 +
4270840 bytes read in 747 ms (5.5 MiB/s)
 +
gpio: pin 56 (gpio 56) value is 1
 +
24129 bytes read in 53 ms (444.3 KiB/s)
 +
Booting from mmc ...
 +
</PRE>
 +
 
 +
And boot with the ext4 root filesystem being loaded from /dev/mmcblk0p2
 +
 
 +
<PRE>
 +
setenv bootargs console=ttyO0,115200n8 ${optargs} root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait
 +
bootm 0x80007fc0 - 0x80F80000
 +
</PRE>
 +
 
 +
<PRE>
 +
Booting from mmc ...
 +
## Booting kernel from Legacy Image at 80007fc0 ...
 +
  Image Name:  Angstrom/3.8.13/beaglebone
 +
  Image Type:  ARM Linux Kernel Image (uncompressed)
 +
  Data Size:    4270776 Bytes = 4.1 MiB
 +
  Load Address: 80008000
 +
  Entry Point:  80008000
 +
  Verifying Checksum ... OK
 +
## Flattened Device Tree blob at 80f80000
 +
  Booting using the fdt blob at 0x80f80000
 +
  XIP Kernel Image ... OK
 +
OK
 +
  Using Device Tree in place at 80f80000, end 80f88e40
 +
 
 +
Starting kernel ...
 +
 
 +
Uncompressing Linux... done, booting the kernel.
 +
</PRE>

Latest revision as of 12:25, 11 August 2013

By default, the ROM in the Sitara AM3359 will boot from the MMC1 interface first (the onboard eMMC), followed by MMC0 (MicroSD), UART0 and USB0.

If the boot switch (S2) is held down during power-up, the ROM will boot from the SPI0 Interface first, followed by MMC0, USB0 and UART0. This allows the BeagleBone Black to bypass the onboard eMMC and boot from the removable uSD (provided no valid boot device is found on SPI0.) This can be used to recover from a corrupted onboard eMMC.

The Sitara AM3359 will try to load and execute the first stage bootloader called "MLO" from a Fat 12/16 or 32 bit MBR based filesystem. If using eMMC, this file is loaded using RAW mode. This means the ROM looks for a TOC at four specific offsets.

MLO Booting (uBoot SPL Second Program Loader):

U-Boot SPL 2013.04-dirty (Jun 19 2013 - 09:57:14)
musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
musb-hdrc: MHDRC RTL version 2.0 
musb-hdrc: setup fifo_mode 4
musb-hdrc: 28/31 max ep, 16384/16384 memory
USB Peripheral mode controller at 47401000 using PIO, IRQ 0
musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
musb-hdrc: MHDRC RTL version 2.0 
musb-hdrc: setup fifo_mode 4
musb-hdrc: 28/31 max ep, 16384/16384 memory
USB Host mode controller at 47401800 using PIO, IRQ 0
OMAP SD/MMC: 0
mmc_send_cmd : timeout: No status update
reading u-boot.img
reading u-boot.img

MLO is a first stage uBoot Bootloader designed to load a second stage uBoot bootloader with enhanced features. This second stage bootloader is also found on the FAT partition with the filename of "u-boot.img"

U-Boot 2013.04-dirty (Jun 19 2013 - 09:57:14)

I2C:   ready
DRAM:  512 MiB
WARNING: Caches not enabled
NAND:  No NAND device found!!!
0 MiB
MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
*** Warning - readenv() failed, using default environment

musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
musb-hdrc: MHDRC RTL version 2.0 
musb-hdrc: setup fifo_mode 4
musb-hdrc: 28/31 max ep, 16384/16384 memory
USB Peripheral mode controller at 47401000 using PIO, IRQ 0
musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
musb-hdrc: MHDRC RTL version 2.0 
musb-hdrc: setup fifo_mode 4
musb-hdrc: 28/31 max ep, 16384/16384 memory
USB Host mode controller at 47401800 using PIO, IRQ 0
Net:   <ethaddr> not set. Validating first E-fuse MAC
cpsw, usb_ether
Hit any key to stop autoboot:  1  0 
gpio: pin 53 (gpio 53) value is 1
Card did not respond to voltage select!
mmc0(part 0) is current device
mmc_send_cmd : timeout: No status update
Card did not respond to voltage select!
No micro SD card found, setting mmcdev to 1
mmc1(part 0) is current device
gpio: pin 54 (gpio 54) value is 1
SD/MMC found on device 1

uBoot will load using a default environment space. This default space includes a variable bootenv=uEnv.txt and associated script that allows additional variables to be added or overwritten by adding them to an uEnv.txt file placed on the FAT partition. uBoot will attempt to load this file and append the extra variables:

reading uEnv.txt
26 bytes read in 2 ms (12.7 KiB/s)
Loaded environment from uEnv.txt
Importing environment from mmc ...

uBoot will then load the Linux Kernel and compiled Device Tree Binary blob from eMMC:

load mmc 1:2 0x80F80000 /boot/am335x-boneblack.dtb
load mmc 1:2 0x80007fc0 /boot/uImage
gpio: pin 55 (gpio 55) value is 1
4270840 bytes read in 747 ms (5.5 MiB/s)
gpio: pin 56 (gpio 56) value is 1
24129 bytes read in 53 ms (444.3 KiB/s)
Booting from mmc ...

And boot with the ext4 root filesystem being loaded from /dev/mmcblk0p2

setenv bootargs console=ttyO0,115200n8 ${optargs} root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait
bootm 0x80007fc0 - 0x80F80000
Booting from mmc ...
## Booting kernel from Legacy Image at 80007fc0 ...
   Image Name:   Angstrom/3.8.13/beaglebone
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4270776 Bytes = 4.1 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 80f80000
   Booting using the fdt blob at 0x80f80000
   XIP Kernel Image ... OK
OK
   Using Device Tree in place at 80f80000, end 80f88e40

Starting kernel ...

Uncompressing Linux... done, booting the kernel.