(Created page with " == BusyBox == <PRE> wget http://busybox.net/downloads/busybox-1.22.1.tar.bz2 tar -xjf busybox-1.22.1.tar.bz2 cd busybox-1.22.1/ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi...")
Line 9: Line 9:
 
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- menuconfig
 
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- menuconfig
 
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi-  
 
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi-  
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- install CONFIG_PREFIX=/home/cpeacock/export/GuruPlug/guruplug-rootfs
+
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- install CONFIG_PREFIX=/home/export/rootfs
 
</PRE>
 
</PRE>
  
Line 20: Line 20:
 
cd glibc-build/
 
cd glibc-build/
 
./configure --target=arm-linux-gnueabi --prefix=  
 
./configure --target=arm-linux-gnueabi --prefix=  
make install install_root=/home/cpeacock/export/GuruPlug/guruplug-rootfs  
+
make install install_root=/home/export/rootfs  
 
</PRE>
 
</PRE>

Revision as of 10:20, 11 April 2014

BusyBox

wget http://busybox.net/downloads/busybox-1.22.1.tar.bz2
tar -xjf busybox-1.22.1.tar.bz2
cd busybox-1.22.1/
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- defconfig
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- menuconfig
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- 
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- install CONFIG_PREFIX=/home/export/rootfs

GLIBC

wget http://ftp.gnu.org/gnu/libc/glibc-2.19.tar.gz
tar -xzf glibc-2.19.tar.gz
mkdir glibc-build
cd glibc-build/
./configure --target=arm-linux-gnueabi --prefix= 
make install install_root=/home/export/rootfs